Category Archives: button
Wood button
Although wood buttons can usually be cleaned like furniture, special care must be given to any trim of other matierals, and to cemented parts. It may be impossible to polish the metal trim on wooden buttons without spoiling the finish … Continue reading
Loop shank
To make this type of shank, a round or flat metal wire was bent so that both ends could be inserted in the back of the button. Some loop shanks have flat metal pieces called shank plates close to the … Continue reading
Tack button
Looking for stocked jeans accessories?
http://www.dot-gas.com/content/rivet_p1.html http://www.dot-gas.com/content/tack_button_p1.html
Customizable tack button
With this fantastic design, you can customize the top of the button with any kinds of acyclic, pearl, rhinestone or even printed object with your brand logo. They’ve been used for denim shirts, jeans, jackets, coats.
Diecast
Diecasting is similar to permanent mold casting except that the metal is injected into the mold under high pressure of 10-210Mpa (1,450-30,500) psi . This results in a more uniform part, generally good surface finish and good dimensional accuracy, as … Continue reading